Malachite Bead Earrings

Malachite Bead Earrings

We've created a simple pair of wire wrapped bead earrings in no time at all! Make the perfect treat for yourself or a gift for someone special.

This is a great beginner project, which doesn't require any soldering.

STEP BY STEP INSTRUCTIONS

1. Use side cutters to cut 10cm of wire - this will give you enough for your post and excess for wire wrapping.

2. The bead we have used is 8mm. On one end of the wire use pliers to bend 0.8mm of wire at a right angle. Thread the short end through the bead hole.

3. Hold the bead securely and wrap 2 full circles around the bead. 

4. Use pliers to create another right angle in line with the hole that has the wire in it.

5. Bend the wire over the bead to the base of the bead.

6. Create another right angle away from the base of the bead. This will form the post.

7. Use side cutters to cut the wire at 1cm to form the post.

8. Use a file to smooth the end of the wire as this needs to be smooth and safe to insert through your pierced ear lobe.

9. Work harden the earring post by squeezing with nylon jaw pliers. (An alternative way to harden the wire is to place the hoop onto a steel block and tap gently using a rawhide mallet or chasing hammer.)

10. Next create a notch on the ear post where the earring scroll will sit. If you have limited tools, the simplest way to do this is by using wire cutters to hold onto the wire and twist.

11. Attach the earring scroll onto the post - these can be adjusted to make tighter or looser if needed.

10. Repeat for the other earring.

Your earrings are now complete!

The beauty of wire wrapping is that you can experiment with your designs such as adding more loops or using other beads. Have fun and get creative!

SUGGESTED TOOLS

Side cutters

Round nose pliers

Snipe nose pliers or flat nose pliers

Nylon jaw pliers for work hardening (or steel blockrawhide mallet/chasing hammer)

You may like to get our pack of pliers & side cutters which is an economical way of buying all the pliers you will need for every project!

CUSTOMISE YOUR KIT

Make the design your own by using your favourite gemstones

HELPFUL PAGES

Read silversmithing advice pages

Read beading advice pages

How to work harden jewellery wire

JEWELLERY MAKING BOOKS

The Encyclopedia Of Wire Jewellery Techniques - Sara Withers


Kernowcraft's jewellery making kits are aimed to inspire you - therefore the step by step instructions are available online only with a shopping list, where you can easily customise the design to suit you. We recommend printing or bookmarking this page ready to follow.

The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.

Your Shopping List

You can buy all the products in this collection at once by clicking the button below or add individual products by clicking the button beside each one.

Total price for all items: £6.96


What Our Customers Say...

;